This release boosts the speed in how the FreeShape 120 communicates with Alpha 3D, allowing users to have a much easier and faster workflow between the two platforms.
Boost speed by up to 40%
The new firmware update will advance the production of your FreeShape120 with 40% optimized speed — thanks to the fine-tuning of our slicing software, Alpha 3D.
User Interface(UI) Upgrade
LCD diagnostic function is also made available for self-checking your FreeShape120.
How do I update my FreeShape120?
There are two ways to update your firmware:
- Via a USB (Recommended)
- Via the Internet


- Please go to our official website:https://old.ackuretta.com/support/freeshape/
- Go to Firmware
- Download the latest firmware, FreeShape Firmware 1.2.0
- Copy the downloaded file to a USB drive
- Attach the USB drive to your FreeShape120
- Select Update firmware from a USB device on the printer
- The FreeShape120 will update and reboot automatically once the update is complete.
- Make sure your FreeShape120 printer is connected via Wi-Fi
- If unsure, please see FreeShape 120: Setting up Wi-Fi Connection
- On the FreeShape120 web browser (Please find the IP Address that appears on your printer, and enter that address on your Internet browser. E.g. 192.168.X.X.XXX)
- Click through the following items on the web browser to update your firmware Settings > Update> Update Firmware online
- The FreeShape120 will update and reboot automatically once the update is complete.